How do I turn on the Analyzer?/ Why won't my Analyzer turn on?/ My device won't turn on.

How do I turn on the Analyzer?/ Why won't my Analyzer turn on?/ My device won't turn on.

  1. Shift the power switch on the back of the Analyzer to turn the system on. When the Analyzer is receiving power, a light above the power switch illuminates green. Additionally, ensure that the Analyzer is plugged in using the external power supply. 

    • Related Articles

    • How do I turn on the Handheld?/ My Handheld won't turn on.

      Press and hold the button on the right-hand side of the Handheld until the start screen appears. A three-note power-on sound she be audible upon holding the power button. You are able to turn on the Handheld both when it is docked on the Analyzer, or ...

    • Does the Analyzer need to be plugged into an outlet?

      In order to turn the Analyzer on, it must be plugged in using the external power supply. 

    • Connection to Analyzer timed out

      This indicates the Handheld did not connect to the Analyzer within 10 seconds or the Handheld was undocked immediately upon docking. Power cycle the Analyzer (Power off the Analyzer, wait 10 seconds, and power it on again.) If this error keeps ...

    • No SD card present in Analyzer. Please contact your POCT

      SD card was not detected in the Analyzer.  Power cycle the Analyzer (Power off the Analyzer, wait 10 seconds, and power it on again.) Attempt new test with new Cartridge If error still occurs, Analyzer should be returned to NanoDx™ for further ...

    • What if the Cartridge gets stuck in the Analyzer?

      Power cycling (turning the Analyzer off, waiting 5-10s, then turning it on again) will eject the Cartridge once the Analyzer reboots. Upon turning the Analyzer on again, it will take about 30-60s for the Analyzer to boot and the Cartridge to eject.