How do I turn on the Handheld?/ My Handheld won't turn on.
- Press and hold the button on the right-hand side of the Handheld until the start screen appears. A three-note power-on sound she be audible upon holding the power button.
- You are able to turn on the Handheld both when it is docked on the Analyzer, or after the Handheld is lifted from the Analyzer.
- Note that if the Handheld is out of battery, it will not turn on, and should be placed on the Analyzer cradle to charge.
Related Articles
How do I turn on the Analyzer?/ Why won't my Analyzer turn on?/ My device won't turn on.
Shift the power switch on the back of the Analyzer to turn the system on. When the Analyzer is receiving power, a light above the power switch illuminates green. Additionally, ensure that the Analyzer is plugged in using the external power supply.
Does the Handheld need to be charged?/ How do I charge the Handheld?
Yes, the Handheld requires periodic charging. To charge the Handheld, ensure that it is situated on the cradle of the Analyzer.
Does the Handheld need to be on the Analyzer when I run the test?
Yes, the Handheld must be placed into the cradle of the Analyzer in order to run either QC or Patient tests. The Handheld will prompt when to place the Handheld into the Analyzer's cradle. Note that when the Handheld prompts for User ID, Patient ID, ...
How do I know if the Handheld is correctly placed on the Analyzer?
Place the Handheld on the cradle on top of the Analyzer. Be sure that it is firmly situated on its cradle, so that the Handheld begins to charge. The Handheld screen will display a battery symbol as a pop-up message and indicate the percentage that ...
Do I need to put the Cartridge in the Handheld when transporting to the Analyzer?
No, the Cartridge does not need to be placed in the Handheld when being transported to the Analyzer. However, it is recommended for ease of transport.