How often should I run a QC test?/ When should I run a QC test?

• Related Articles

• What action should be taken if the QC test fails?/ What should I do if the QC test fails?

  If any QC test is a FAIL, then re-run the QC test for that specific control. If the second test is a PASS, then procedd to the next step of the QC test procedure. If this re-test was the last step in the process, and all other tests have also been ...

• How can I tell the last time a QC test was run?/ Where can I find QC test history?

  Press "RESULTS" on the Main Menu and scroll through the results.  All QC tests are marked with a magnifying glass and will have the type (liquid or electronic) listed as well. Green row = pass, red row = invalid result or failure. 

• How often should I run the ETC test?

  It is recommended that the NanoDx™ System functionality is tested periodically before use, in accordance with your institution's quality policies and procedures. 

• Does the Handheld need to be on the Analyzer when I run the test?

  Yes, the Handheld must be placed into the cradle of the Analyzer in order to run either QC or Patient tests. The Handheld will prompt when to place the Handheld into the Analyzer's cradle. Note that when the Handheld prompts for User ID, Patient ID, ...

• What happens if the specimen expires?/ Can you run a test with expired specimen?

  Specimens must be run within 10 minutes of collection to ensure accurate readings by the Analyzer. Using a specimen collected more than 10 minutes prior to insertion in the Analyzer may not generate accurate test results.