How do I configure the system?

If the Handheld is docked on the Analyzer, lift it off. If the Handheld is not already on, press and hold the button on the right-hand side to switch it on.
On the "Start" screen, press "SETTINGS".
You will the be prompted to enter an administrator password. Enter the password or ask your administrator to enter the password and press the check mark icon which is "Confirm".
The "System Settings" screen enables Users to configure the following items:

Related Articles
At what temperature should Cartridges be stored?/ How do I store system components?
Store cartridges between 2 °C to 8 °C (36 °F to 46 °F). System components should all be stored in a clean and dry space at room temperature (18 °C to 25 °C/64 °F to 46 °F).
How do I clean the system?
The Analyzer, Handheld, and ETC must be cleaned periodically, based on your institution's protocols. These components can be cleaned using an alcohol wipe, containing at least 70% isopropyl alcohol (IPA). Avoid directly spraying the unit with IPA or ...
Will water or other cleaning products damage the system?
Users shouldn't put anything into the opening of the Analyzer port. It's unavoidable getting some dribbles of cleaning fluid into the front opening of the Analyzer during the wipe down cleaning we specify; this will not pose a problem with ...
Do I need to clean the system in between patient tests?
Yes, you must clean both the Handheld and the Analyzer between patient tests and after positive and negative external control testing.
How often should I run a QC test?/ When should I run a QC test?
It is recommended that the NanoDx™ System functionality is tested periodically before use, in accordance with your institution's quality policies and procedures.

Related Articles